TekNational, Inc.
Dual Locking Supports
For 1/16" PCB's

5200 Series

  • Identical locking prongs on both ends (figure 1).
  • Available in stock for mounting in .156"(4.0)/.156"(4.0) diameter and .187"(4.8)/.187"(4.8) diameter holes.
  • A .156"/.187" diameter combination may be special ordered.
  • Seven lengths available from 3/16"(4.8) to 7/8"(22.2).

5800 Series

 

  • Bayonet nose lock for mounting in .156"(4.0) diameter hole in PCB with a locking prong to mount in a .187"(4.8) diameter base hole (figure 2).
  • May be special ordered for 1/8"(3.2) chassis thickness.
  • Seven standard lengths stocked.
  • Other lengths up to 1 3/8"(34.9) may be special ordered.
Part numbers consist of the base number for the PCB/Chassis hole combination desired followed by "XXX" for the length designation in the table below.
Base #FigurePCB Hole Dia.Chassis Hole Dia.XXXLength
52001.156(4.0).156(4.0)-1873/16"(4.8)
52251.187(4.8).187(4.8)-2501/4"(6.4)
5250*1.156(4.0).187(4.8)-3753/8"(9.5)
58002.156(4.0).187(4.8)-5001/2"(12.7)
-6255/8"(15.9)
* Special Order-7503/4"(19.1)
-8757/8"(22.2)